[Tutorial] Tirando Servidor de Metin do Hamachi

Tutorial Tirando Servidor de Metin do Hamachi e colocando em Host no-ip

Parte 1:http://www.youtube.com/watch?v=wpzrz3aRn2Y&feature=player_embedded

Parte 2:http://www.youtube.com/watch?v=RhdpUOq_4Zk&feature=player_embedded

Parte 3:http://www.youtube.com/watch?v=VKgsoZpd7B4&feature=player_embedded


Veja na Parte 3 como configurar o Virtual PC

Você ira usar os sequintes ips

192.168.5.1 e 192.168.5.100


Para acessar o Navicat será assim:

Connection Name: NOME DO SERVIDOR
Host name / IP address: 192.168.5.100
Port: 3306
User name: root
Password: 123456

Seleciona Save Password e da OK.

Para trocar a senha do Navicat ( para que o server nao seje hackeado ) depois de conectado no navicat clica em Manager User vai em root@% edit user e altera a senha depois salva desloga do navicat coloca a senha onde tava 123456 para a senha alterada no root@% ( no site deve colocar a senha que foi alterada ).

No PortMap coloque o ip 192.168.5.100


Para Configurar o site vá na pasta C:\xampp\apache\conf ( se tiver instalado nela ) Abra o arquivo httpd.conf usando o bloco de notas ou notepad ++ Copie o que está no Spoiler abaixo para o httpd.conf:

  Código:

# # This is the main Apache HTTP server configuration file.  It contains the # configuration directives that give the server its instructions. # See for detailed information. # In particular, see # # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do.  They're here only as hints or reminders.  If you are unsure # consult the online docs. You have been warned.  # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path.  If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "C:/xampp/apache" will be interpreted by the # server as "C:/xampp/apache/logs/foo.log". # # NOTE: Where filenames are specified, you must use forward slashes # instead of backslashes (e.g., "c:/apache" instead of "c:\apache"). # If a drive letter is omitted, the drive on which httpd.exe is located # will be used by default.  It is recommended that you always supply # an explicit drive letter in absolute paths to avoid confusion. # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path.  If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk.  If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "C:/xampp/apache" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 0.0.0.0:8080 #Listen [::]:8080 Listen 8080 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule actions_module modules/mod_actions.so LoadModule alias_module modules/mod_alias.so LoadModule asis_module modules/mod_asis.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so #LoadModule authn_alias_module modules/mod_authn_alias.so #LoadModule authn_anon_module modules/mod_authn_anon.so #LoadModule authn_dbd_module modules/mod_authn_dbd.so #LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authn_file_module modules/mod_authn_file.so #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so #LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_host_module modules/mod_authz_host.so #LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_user_module modules/mod_authz_user.so ##LoadModule autoindex_module modules/mod_autoindex.so # replaced with autoindex_color_module #LoadModule bucketeer_module modules/mod_bucketeer.so #LoadModule cache_module modules/mod_cache.so #LoadModule case_filter_module modules/mod_case_filter.so #LoadModule case_filter_in_module modules/mod_case_filter_in.so #LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule cgi_module modules/mod_cgi.so #LoadModule charset_lite_module modules/mod_charset_lite.so LoadModule dav_module modules/mod_dav.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule dav_lock_module modules/mod_dav_lock.so #LoadModule dbd_module modules/mod_dbd.so #LoadModule deflate_module modules/mod_deflate.so LoadModule dir_module modules/mod_dir.so #LoadModule disk_cache_module modules/mod_disk_cache.so #LoadModule dumpio_module modules/mod_dumpio.so #LoadModule echo_module modules/mod_echo.so LoadModule env_module modules/mod_env.so #LoadModule example_module modules/mod_example.so #LoadModule expires_module modules/mod_expires.so #LoadModule ext_filter_module modules/mod_ext_filter.so #LoadModule file_cache_module modules/mod_file_cache.so #LoadModule filter_module modules/mod_filter.so LoadModule headers_module modules/mod_headers.so #LoadModule ident_module modules/mod_ident.so #LoadModule imagemap_module modules/mod_imagemap.so LoadModule include_module modules/mod_include.so LoadModule info_module modules/mod_info.so LoadModule isapi_module modules/mod_isapi.so #LoadModule ldap_module modules/mod_ldap.so #LoadModule logio_module modules/mod_logio.so LoadModule log_config_module modules/mod_log_config.so #LoadModule log_forensic_module modules/mod_log_forensic.so #LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule mime_module modules/mod_mime.so #LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule negotiation_module modules/mod_negotiation.so #LoadModule proxy_module modules/mod_proxy.so #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule proxy_connect_module modules/mod_proxy_connect.so #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule setenvif_module modules/mod_setenvif.so #LoadModule speling_module modules/mod_speling.so LoadModule ssl_module modules/mod_ssl.so LoadModule status_module modules/mod_status.so #LoadModule substitute_module modules/mod_substitute.so #LoadModule unique_id_module modules/mod_unique_id.so #LoadModule userdir_module modules/mod_userdir.so #LoadModule usertrack_module modules/mod_usertrack.so #LoadModule version_module modules/mod_version.so #LoadModule vhost_alias_module modules/mod_vhost_alias.so # # 3rd party modules # LoadModule autoindex_color_module modules/mod_autoindex_color.so # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch.  # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User daemon Group daemon # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # definition.  These values also provide defaults for # any containers you may define later in the file. # # All of these directives may appear inside containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed.  This address appears on some server-generated pages, such # as error documents.  e.g. admin@your-domain.com # ServerAdmin postmaster@localhost # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # ServerName localhost:8080 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "C:/xampp/htdocs" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features.  #     Options FollowSymLinks     AllowOverride None     Order deny,allow     Deny from all # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. #     #     # Possible values for the Options directive are "None", "All",     # or any combination of:     #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews     #     # Note that "MultiViews" must be named *explicitly* --- "Options All"     # doesn't give it to you.     #     # The Options directive is both complicated and important.  Please see     # http://httpd.apache.org/docs/2.2/mod/core.html#options     # for more information.     #     Options Indexes FollowSymLinks Includes ExecCGI     #     # AllowOverride controls what directives may be placed in .htaccess files.     # It can be "All", "None", or any combination of the keywords:     #   Options FileInfo AuthConfig Limit     #     AllowOverride All     #     # Controls who can get stuff from this server.     #     Order allow,deny     Allow from all # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. #     DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm \                    default.php default.pl default.cgi default.asp default.shtml default.html default.htm \                    home.php home.pl home.cgi home.asp home.shtml home.html home.htm # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. #     Order allow,deny     Deny from all     Satisfy All # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a # container, error messages relating to that virtual host will be # logged here.  If you *do* define an error logfile for a # container, that host's errors will be logged there and not here. # ErrorLog "logs/error.log" #scriptLog "logs/cgi.log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn     #     # The following directives define some format nicknames for use with     # a CustomLog directive (see below).     #     LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined     LogFormat "%h %l %u %t \"%r\" %>s %b" common           # You need to enable mod_logio.c to use %I and %O       LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio         #     # The location and format of the access logfile (Common Logfile Format).     # If you do not define any access logfiles within a     # container, they will be logged here.  Contrariwise, if you *do*     # define per- access logfiles, transactions will be     # logged therein and *not* in this file.     #     #CustomLog "logs/access.log" common     #     # If you prefer a logfile with access, agent, and referer information     # (Combined Logfile Format) you can use the following directive.     #     CustomLog "logs/access.log" combined     #     # Redirect: Allows you to tell clients about documents that used to     # exist in your server's namespace, but do not anymore. The client     # will make a new request for the document at its new location.     # Example:     # Redirect permanent /foo http://localhost/bar     #     # Alias: Maps web paths into filesystem paths and is used to     # access content that does not live under the DocumentRoot.     # Example:     # Alias /webpath /full/filesystem/path     #     # If you include a trailing / on /webpath then the server will     # require it to be present in the URL.  You will also likely     # need to provide a section to allow access to     # the filesystem path.     #     # scriptAlias: This controls which directories contain server scripts.     # scriptAliases are essentially the same as Aliases, except that     # documents in the target directory are treated as applications and     # run by the server when requested rather than as documents sent to the     # client.  The same rules about trailing "/" apply to scriptAlias     # directives as to Alias.     #     scriptAlias /cgi-bin/ "C:/xampp/cgi-bin/"     #     # scriptSock: On threaded servers, designate the path to the UNIX     # socket used to communicate with the CGI daemon of mod_cgid.     #     #scriptsock "logs/cgi.sock" # # "C:/xampp/cgi-bin" should be changed to whatever your scriptAliased # CGI directory exists, if you have that configured. #     AllowOverride None     Options None     Order allow,deny     Allow from all # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value.  If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain     #     # TypesConfig points to the file containing the list of mappings from     # filename extension to MIME-type.     #     TypesConfig "conf/mime.types"     #     # AddType allows you to add to or override the MIME configuration     # file specified in TypesConfig for specific file types.     #     #AddType application/x-gzip .tgz     #     # AddEncoding allows you to have certain browsers uncompress     # information on the fly. Note: Not all browsers support this.     #     #AddEncoding x-compress .Z     #AddEncoding x-gzip .gz .tgz     #     # If the AddEncoding directives above are commented-out, then you     # probably should define those extensions to indicate media types:     #     AddType application/x-compress .Z     AddType application/x-gzip .gz .tgz     #     # AddHandler allows you to map certain file extensions to "handlers":     # actions unrelated to filetype. These can be either built into the server     # or added with the Action directive (see below)     #     # To use CGI scripts outside of scriptAliased directories:     # (You will also need to add "ExecCGI" to the "Options" directive.)     #     AddHandler cgi-script .cgi .pl .asp     # For type maps (negotiated resources):     #AddHandler type-map var     #     # Filters allow you to process content before it is sent to the client.     #     # To parse .shtml files for server-side includes (SSI):     # (You will also need to add "Includes" to the "Options" directive.)     #     AddType text/html .shtml     AddOutputFilter INCLUDES .shtml     #     # The mod_mime_magic module allows the server to use various hints from the     # contents of the file itself to determine its type.  The MIMEMagicFile     # directive tells the module where the hint definitions are located.     #     MIMEMagicFile "conf/magic" # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://localhost/subscription_info.html # # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files.  This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnableMMAP off #EnableSendfile off # Supplemental configuration # # The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # XAMPP specific settings Include "conf/extra/httpd-xampp.conf" # Perl settings Include "conf/extra/perl.conf" # Server-pool management (MPM specific) Include "conf/extra/httpd-mpm.conf" # Multi-language error messages Include "conf/extra/httpd-multilang-errordoc.conf" # Fancy directory listings Include "conf/extra/httpd-autoindex.conf" # Language settings Include "conf/extra/httpd-languages.conf" # User home directories Include "conf/extra/httpd-userdir.conf" # Real-time info on requests and configuration Include "conf/extra/httpd-info.conf" # Virtual hosts Include "conf/extra/httpd-vhosts.conf" # Distributed authoring and versioning (WebDAV) Include "conf/extra/httpd-dav.conf" # Implements a proxy/gateway for Apache. Include "conf/extra/httpd-proxy.conf" # Various default settings Include "conf/extra/httpd-default.conf" # Secure (SSL/TLS) connections Include "conf/extra/httpd-ssl.conf" # # Note: The following must must be present to support #       starting without SSL on platforms with no /dev/random equivalent #       but a statically compiled-in mod_ssl. #     SSLRandomSeed startup builtin     SSLRandomSeed connect builtin     SSLSessionCache "shmcb:logs/ssl.scache(512000)"     SSLSessionCacheTimeout 300

Substitua tudo que está no httpd.conf pelo que está no Spoiler acima '-' - depois coloque os arquivos do web site no HLTDOCs

PARA O SITE FICAR ON ( CADASTRO, PAGINA, ETC... ) VOCE DEVERA COLOCAR O SEQUINTE IP NOS ARQUIVOS conn.php E config.php ALTERE O IP NA LINHA: $conn=mysql_connect ("IP .100", "root", "123456");
?>

Coloque onde está ("IP .100", coloque: 192.168.5.100 Se você alterou a senha no NAVICAT coloque a senha onde está "123456"); muda para a senha que trocou no navicat '-'


Créditos: Videos - ADM do AviraMT2

Tutorial em Texto: [spoiler] Veja na Parte 3 como configurar o Virtual PC

Você ira usar os sequintes ips

192.168.5.1 e 192.168.5.100 Para acessar o Navicat será assim:

Connection Name: NOME DO SERVIDOR
Host name / IP address: 192.168.5.100
Port: 3306
User name: root
Password: 123456

Seleciona Save Password e da OK.

Para trocar a senha do Navicat ( para que o server nao seje hackeado ) depois de conectado no navicat clica em Manager User vai em root@% edit user e altera a senha depois salva desloga do navicat coloca a senha onde tava 123456 para a senha alterada no root@% ( no site deve colocar a senha que foi alterada ).
No PortMap coloque o ip 192.168.5.100
Para Configurar o site vá na pasta C:\xampp\apache\conf ( se tiver instalado nela ) Abra o arquivo httpd.conf usando o bloco de notas ou notepad ++ Copie o que está no Spoiler abaixo para o httpd.conf:

  Código:

# # This is the main Apache HTTP server configuration file.  It contains the # configuration directives that give the server its instructions. # See for detailed information. # In particular, see # # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do.  They're here only as hints or reminders.  If you are unsure # consult the online docs. You have been warned.  # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path.  If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "C:/xampp/apache" will be interpreted by the # server as "C:/xampp/apache/logs/foo.log". # # NOTE: Where filenames are specified, you must use forward slashes # instead of backslashes (e.g., "c:/apache" instead of "c:\apache"). # If a drive letter is omitted, the drive on which httpd.exe is located # will be used by default.  It is recommended that you always supply # an explicit drive letter in absolute paths to avoid confusion. # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path.  If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk.  If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "C:/xampp/apache" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 0.0.0.0:8080 #Listen [::]:8080 Listen 8080 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule actions_module modules/mod_actions.so LoadModule alias_module modules/mod_alias.so LoadModule asis_module modules/mod_asis.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so #LoadModule authn_alias_module modules/mod_authn_alias.so #LoadModule authn_anon_module modules/mod_authn_anon.so #LoadModule authn_dbd_module modules/mod_authn_dbd.so #LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authn_file_module modules/mod_authn_file.so #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so #LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_host_module modules/mod_authz_host.so #LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_user_module modules/mod_authz_user.so ##LoadModule autoindex_module modules/mod_autoindex.so # replaced with autoindex_color_module #LoadModule bucketeer_module modules/mod_bucketeer.so #LoadModule cache_module modules/mod_cache.so #LoadModule case_filter_module modules/mod_case_filter.so #LoadModule case_filter_in_module modules/mod_case_filter_in.so #LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule cgi_module modules/mod_cgi.so #LoadModule charset_lite_module modules/mod_charset_lite.so LoadModule dav_module modules/mod_dav.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule dav_lock_module modules/mod_dav_lock.so #LoadModule dbd_module modules/mod_dbd.so #LoadModule deflate_module modules/mod_deflate.so LoadModule dir_module modules/mod_dir.so #LoadModule disk_cache_module modules/mod_disk_cache.so #LoadModule dumpio_module modules/mod_dumpio.so #LoadModule echo_module modules/mod_echo.so LoadModule env_module modules/mod_env.so #LoadModule example_module modules/mod_example.so #LoadModule expires_module modules/mod_expires.so #LoadModule ext_filter_module modules/mod_ext_filter.so #LoadModule file_cache_module modules/mod_file_cache.so #LoadModule filter_module modules/mod_filter.so LoadModule headers_module modules/mod_headers.so #LoadModule ident_module modules/mod_ident.so #LoadModule imagemap_module modules/mod_imagemap.so LoadModule include_module modules/mod_include.so LoadModule info_module modules/mod_info.so LoadModule isapi_module modules/mod_isapi.so #LoadModule ldap_module modules/mod_ldap.so #LoadModule logio_module modules/mod_logio.so LoadModule log_config_module modules/mod_log_config.so #LoadModule log_forensic_module modules/mod_log_forensic.so #LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule mime_module modules/mod_mime.so #LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule negotiation_module modules/mod_negotiation.so #LoadModule proxy_module modules/mod_proxy.so #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule proxy_connect_module modules/mod_proxy_connect.so #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule setenvif_module modules/mod_setenvif.so #LoadModule speling_module modules/mod_speling.so LoadModule ssl_module modules/mod_ssl.so LoadModule status_module modules/mod_status.so #LoadModule substitute_module modules/mod_substitute.so #LoadModule unique_id_module modules/mod_unique_id.so #LoadModule userdir_module modules/mod_userdir.so #LoadModule usertrack_module modules/mod_usertrack.so #LoadModule version_module modules/mod_version.so #LoadModule vhost_alias_module modules/mod_vhost_alias.so # # 3rd party modules # LoadModule autoindex_color_module modules/mod_autoindex_color.so # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch.  # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User daemon Group daemon # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # definition.  These values also provide defaults for # any containers you may define later in the file. # # All of these directives may appear inside containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed.  This address appears on some server-generated pages, such # as error documents.  e.g. admin@your-domain.com # ServerAdmin postmaster@localhost # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # ServerName localhost:8080 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "C:/xampp/htdocs" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features.  #     Options FollowSymLinks     AllowOverride None     Order deny,allow     Deny from all # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. #     #     # Possible values for the Options directive are "None", "All",     # or any combination of:     #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews     #     # Note that "MultiViews" must be named *explicitly* --- "Options All"     # doesn't give it to you.     #     # The Options directive is both complicated and important.  Please see     # http://httpd.apache.org/docs/2.2/mod/core.html#options     # for more information.     #     Options Indexes FollowSymLinks Includes ExecCGI     #     # AllowOverride controls what directives may be placed in .htaccess files.     # It can be "All", "None", or any combination of the keywords:     #   Options FileInfo AuthConfig Limit     #     AllowOverride All     #     # Controls who can get stuff from this server.     #     Order allow,deny     Allow from all # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. #     DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm \                    default.php default.pl default.cgi default.asp default.shtml default.html default.htm \                    home.php home.pl home.cgi home.asp home.shtml home.html home.htm # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. #     Order allow,deny     Deny from all     Satisfy All # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a # container, error messages relating to that virtual host will be # logged here.  If you *do* define an error logfile for a # container, that host's errors will be logged there and not here. # ErrorLog "logs/error.log" #scriptLog "logs/cgi.log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn     #     # The following directives define some format nicknames for use with     # a CustomLog directive (see below).     #     LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined     LogFormat "%h %l %u %t \"%r\" %>s %b" common           # You need to enable mod_logio.c to use %I and %O       LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio         #     # The location and format of the access logfile (Common Logfile Format).     # If you do not define any access logfiles within a     # container, they will be logged here.  Contrariwise, if you *do*     # define per- access logfiles, transactions will be     # logged therein and *not* in this file.     #     #CustomLog "logs/access.log" common     #     # If you prefer a logfile with access, agent, and referer information     # (Combined Logfile Format) you can use the following directive.     #     CustomLog "logs/access.log" combined     #     # Redirect: Allows you to tell clients about documents that used to     # exist in your server's namespace, but do not anymore. The client     # will make a new request for the document at its new location.     # Example:     # Redirect permanent /foo http://localhost/bar     #     # Alias: Maps web paths into filesystem paths and is used to     # access content that does not live under the DocumentRoot.     # Example:     # Alias /webpath /full/filesystem/path     #     # If you include a trailing / on /webpath then the server will     # require it to be present in the URL.  You will also likely     # need to provide a section to allow access to     # the filesystem path.     #     # scriptAlias: This controls which directories contain server scripts.     # scriptAliases are essentially the same as Aliases, except that     # documents in the target directory are treated as applications and     # run by the server when requested rather than as documents sent to the     # client.  The same rules about trailing "/" apply to scriptAlias     # directives as to Alias.     #     scriptAlias /cgi-bin/ "C:/xampp/cgi-bin/"     #     # scriptSock: On threaded servers, designate the path to the UNIX     # socket used to communicate with the CGI daemon of mod_cgid.     #     #scriptsock "logs/cgi.sock" # # "C:/xampp/cgi-bin" should be changed to whatever your scriptAliased # CGI directory exists, if you have that configured. #     AllowOverride None     Options None     Order allow,deny     Allow from all # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value.  If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain     #     # TypesConfig points to the file containing the list of mappings from     # filename extension to MIME-type.     #     TypesConfig "conf/mime.types"     #     # AddType allows you to add to or override the MIME configuration     # file specified in TypesConfig for specific file types.     #     #AddType application/x-gzip .tgz     #     # AddEncoding allows you to have certain browsers uncompress     # information on the fly. Note: Not all browsers support this.     #     #AddEncoding x-compress .Z     #AddEncoding x-gzip .gz .tgz     #     # If the AddEncoding directives above are commented-out, then you     # probably should define those extensions to indicate media types:     #     AddType application/x-compress .Z     AddType application/x-gzip .gz .tgz     #     # AddHandler allows you to map certain file extensions to "handlers":     # actions unrelated to filetype. These can be either built into the server     # or added with the Action directive (see below)     #     # To use CGI scripts outside of scriptAliased directories:     # (You will also need to add "ExecCGI" to the "Options" directive.)     #     AddHandler cgi-script .cgi .pl .asp     # For type maps (negotiated resources):     #AddHandler type-map var     #     # Filters allow you to process content before it is sent to the client.     #     # To parse .shtml files for server-side includes (SSI):     # (You will also need to add "Includes" to the "Options" directive.)     #     AddType text/html .shtml     AddOutputFilter INCLUDES .shtml     #     # The mod_mime_magic module allows the server to use various hints from the     # contents of the file itself to determine its type.  The MIMEMagicFile     # directive tells the module where the hint definitions are located.     #     MIMEMagicFile "conf/magic" # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://localhost/subscription_info.html # # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files.  This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnableMMAP off #EnableSendfile off # Supplemental configuration # # The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # XAMPP specific settings Include "conf/extra/httpd-xampp.conf" # Perl settings Include "conf/extra/perl.conf" # Server-pool management (MPM specific) Include "conf/extra/httpd-mpm.conf" # Multi-language error messages Include "conf/extra/httpd-multilang-errordoc.conf" # Fancy directory listings Include "conf/extra/httpd-autoindex.conf" # Language settings Include "conf/extra/httpd-languages.conf" # User home directories Include "conf/extra/httpd-userdir.conf" # Real-time info on requests and configuration Include "conf/extra/httpd-info.conf" # Virtual hosts Include "conf/extra/httpd-vhosts.conf" # Distributed authoring and versioning (WebDAV) Include "conf/extra/httpd-dav.conf" # Implements a proxy/gateway for Apache. Include "conf/extra/httpd-proxy.conf" # Various default settings Include "conf/extra/httpd-default.conf" # Secure (SSL/TLS) connections Include "conf/extra/httpd-ssl.conf" # # Note: The following must must be present to support #       starting without SSL on platforms with no /dev/random equivalent #       but a statically compiled-in mod_ssl. #     SSLRandomSeed startup builtin     SSLRandomSeed connect builtin     SSLSessionCache "shmcb:logs/ssl.scache(512000)"     SSLSessionCacheTimeout 300

Substitua tudo que está no httpd.conf pelo que está no Spoiler acima '-' - depois coloque os arquivos do web site no HLTDOCs
Foi Feito por mim. [Admin Gran]